New Irrigation Valves

Irrigation Valves

GSV Series Valves

PEB/ PESB Series Valves

Quick-Coupling Valves

GSV Series Valves

Designed for the Harshest Conditions

Rain Bird GSV Series Valves deliver the reliable performance you can trust year after year in a full line of plastic and brass options. With precision pressure regulation pre-installed, the GSV Series provides an innovative solution that's strong enough to weather any storm.

Features:

Powerful Surge Protection

25KV surge protection with the GBS25 Solenoid and 20KV surge protection with the ICM.

Adjustable Pressure Regulation

Maintain the constant pressure you need between 15 and 100 psi (1.04 to 6.90 bar), regardless of incoming pressure fluctuations.

Designed to Resist Chemicals and Reclaimed Water

A chlorine-resistant diaphragm delivers increased protection against harsh chemicals.

Specs:

Stand Up to the Storm

25 KV surge protection with the GBS25 Solenoid and 20 KV surge protection with ICM.
Built-in filtration with the GBS25 Solenoid for a second level of protection from debris.

Overcome Pressure Fluctuations

A pre-installed PRS-DIAL regulates outlet pressure in the field for better distribution uniformity.
Improved pressure spike reduction capabilities reduce water hammer.
Adjustment knob with indicator allows fine-tuning in 1/3 psi (0.02 bar) increments.

Install Extreme Durability

All models feature chlorine-resistant diaphragm for applications using reclaimed water and include an extra purple flow control handle/ handle cover to designate non-potable water.
Scrubber mechanism encapsulates stainless steel screen to dislodge grit and plant material.
Waterproof dial cartridge eliminates fogging and binding.
Ergonomic design with snap-tight cover on dial cartridge prevents vandalism.

PEB / PESB Series Valves

Features:

Durable glass-filled nylon construction with fabric-reinforced rubber diaphragm for long life and reliable performance
Globe configuration
Normally closed, forward flow design
Slow closing to prevent water hammer and subsequent system damage
Low flow capability for a wide range of applications
One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service
Flow control handle adjusts water flows as needed
Manual internal bleed manually operates the valve without allowing water into the valve box; allows pressure regulator to be adjusted without turning the valve on at the controller first
Manual external bleed permits flushing debris from the system. Recommended for system start up and after repairs
Stainless steel studs molded into the body. Bonnet can be attached and removed more easily and more often without damaging threads
Nylon scrubber scrapes a stainless steel screen to clean and break down grit and plant material. Prevents debris build-up and clogging (PESB Series only)
Five year trade warranty

Best-in-class professional series plastic irrigation valves

The PEB Series is our most durable plastic irrigation valve. This industrial-strength glass-filled nylon globe valve is ideal for commercial irrigation applications.

The PESB series incorporates innovative scrubber technology for reliable performance in dirty water irrigation applications.

Specs:

Pressure:
- 20 to 200 psi (1.4 to 13.8 bar)
Flow without PRS-D option:
- 0.25 to 300 gpm (0.06 to 68.1 m3/h, 0.02 to 18.90 l/s)
Flow with PRS-D option:
- 5 to 300 gpm (1.14 to 68.1 m3/h, 0.32 to 18.90 l/s)
Temperature:
- Up to 150° F (66°C)
Power:
- 24VAC 50/60 Hz (cycles/sec) solenoid power requirement
Inrush Current:
- 0.41A (9.9VA) at 50/60 Hz
Holding Current:
- 0.14A (3.43VA) at 50/60 Hz

Options:

Accommodates optional, field-installed PRS-D pressure regulating module to ensure optimum sprinkler performance regulates up to 100 psi (6.9 bar)
Accepts latching solenoid for use with Rain Bird battery-operated controllers up to 150 psi (10.35 bar)
Compatible with ESP-LXD decoders
Optional purple flow control handle for non-potable water applications PEB-NP-HAN1 (1"), PEB-NP-HAN2 (1 1/2" and 2")

Dimensions:

100-PEB:
- 6 1/2" x 4" x 4" - (16.5 cm) x (10.2 cm) x (10.2 cm) H x L x W
150-PEB:
- 8" x 6" x 6" - (20.3 cm) x (15.2 cm) x (15.2 cm) H x L x W
200-PEB:
- 8" x 6" x 6" - (20.3 cm) x (15.2 cm) x (15.2 cm) H x L x W
300-PESB:
- 13 1/4" x 8" x 7" - (34.61 cm) x (20.32 cm) x (17.78 cm) H x L x W

Model Comparison:

100-PEB & 100-PESB:
- 1" NPT
150-PEB & 150-PESB:
- 1 1/2" NPT
200-PEB & 200-PESB:
- 2" NPT
300-PESB:
- 3" NPT

Quick-Coupling Brass Valves

Convenient water access in potable and non-potable systems

Industrial-strength brass quick-coupling valves for convenient water access in potable and non-potable systems.

Rugged, red brass construction for long life and reliable performance.

Reliable operation with strong corrosion-resistant stainless steel spring.

Features:

Standard locking cover on models 33-DNP, 44-NP, 44-NP ACME and 5-NP (use 2049 to unlock). Optional locking cover on models 33-DLRC, 44-LRC and 5-LRC. Metal cover on model 7 only.
One-piece body design (models 3-RC, 5-RC and 7)
Two-piece body design for easy servicing (models 33-DRC, 44-LRC, 44-RC, 33-DNP, 44-NP and 44-NP ACME).
Strong corrosion-resistant stainless steel spring prevents leakage.
Thermoplastic cover for durability.

Specs:

Pressure:
- 5 to 125 psi (0.35 to 8.63 bar)
Flow:
- 10 to 125 gpm (2.27 to 28.38 m3/h, 37.8 to 473 l/m)
33-DNP, 44-NP, and 5-NP Flow:
- 10 to 70 gpm (2.27 to 15.89 m3/h, 37.8 to 265 l/m)

Dimensions:

3-RC: Height 4 1/4" (10.8cm)
33-DRC: Height 4 3/8" (11.7cm)
33-DLRC: Height 4 5/8" (11.7cm)
44-RC: Height 6" (15.2cm)
44-LRC: Height 6" (15.2cm)
5-RC: Height 5 1/2" (14.0cm)

5-LRC: Height 5 1/2" (14.0cm)
7: Height 5 3/4" (14.6cm)
33-DNP: Height 4 3/8" (11.1cm)
44-NP: Height 6" (15.2cm)
44-DNP ACME: Height 6" (15.2cm)
5-NP: Height 5 1/2" (14.0cm)

Model Comparison:

3-RC: 3/4" (20/27) Rubber Cover, 1-Piece Body
33-DRC: 3/4" (20/27) Double Track Key Lug, Rubber Cover, 2-Piece Body
33-DLRC: 3/4" (20/27) Double Track Key Lug, Locking Rubber Cover, 2-Piece Body
44-RC: 1" (26/34) Rubber Cover, 2-Piece Body
44-LRC: 1" (26/34) Locking Rubber Cover, 2-Piece Body
5-RC: 1" (26/34) Rubber Cover, 1-Piece Body
5-LRC: 1" (26/34) Locking Rubber Cover, 1-Piece Body
7: 1 1/2" (40/49) Metal Cover, 1-Piece Body
5-RC-BSP: 1" (26/34) Rubber Cover, 1-Piece Body, BSP threaded

5-LRC-BSP: 1" (26/34) Locking Rubber Cover, 1-Piece Body, BSP threaded
33-DNP: 3/4" (20/27) Non-potable, Purple Locking Cover, 2-Piece Body
44-NP: 1" (26/34) Non-potable, Purple Locking Cover, 2-Piece Body
44-NP ACME: 1" (26/34) Non-potable, Purple Locking Cover, 2-Piece Body, ACME thread
5-NP: 1" (26/34) Non-potable, Purple Locking Cover, 1-Piece Body

Irrigation Valves

GSV Series Valves

PEB/ PESB Series Valves

Quick-Coupling Valves

GSV Series Valves

Designed for the Harshest Conditions

Rain Bird GSV Series Valves deliver the reliable performance you can trust year after year in a full line of plastic and brass options. With precision pressure regulation pre-installed, the GSV Series provides an innovative solution that's strong enough to weather any storm.

Features:

Powerful Surge Protection

25KV surge protection with the GBS25 Solenoid and 20KV surge protection with the ICM.

Adjustable Pressure Regulation

Maintain the constant pressure you need between 15 and 100 psi (1.04 to 6.90 bar), regardless of incoming pressure fluctuations.

Designed to Resist Chemicals and Reclaimed Water

A chlorine-resistant diaphragm delivers increased protection against harsh chemicals.​​​​​

Specs:

Stand Up to the Storm​

25 KV surge protection with the GBS25 Solenoid and 20 KV surge protection with ICM.

Built-in filtration with the GBS25 Solenoid for a second level of protection from debris.

​

Overcome Pressure Fluctuations

A pre-installed PRS-DIAL regulates outlet pressure in the field for better distribution uniformity.

Improved pressure spike reduction capabilities reduce water hammer.

Adjustment knob with indicator allows fine-tuning in 1/3 psi (0.02 bar) increments.

​

Install Extreme Durability

All models feature chlorine-resistant diaphragm for applications using reclaimed water and include an extra purple flow control handle/ handle cover to designate non-potable water.

Scrubber mechanism encapsulates stainless steel screen to dislodge grit and plant material.

Waterproof dial cartridge eliminates fogging and binding.

Ergonomic design with snap-tight cover on dial cartridge prevents vandalism.

Related Documents:

PEB / PESB Series Valves

Features:

Durable glass-filled nylon construction with fabric-reinforced rubber diaphragm for long life and reliable performance

Globe configuration

Normally closed, forward flow design

Slow closing to prevent water hammer and subsequent system damage

Low flow capability for a wide range of applications

One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service

Flow control handle adjusts water flows as needed

Manual internal bleed manually operates the valve without allowing water into the valve box; allows pressure regulator to be adjusted without turning the valve on at the controller first

Manual external bleed permits flushing debris from the system. Recommended for system start up and after repairs

Stainless steel studs molded into the body. Bonnet can be attached and removed more easily and more often without damaging threads

Nylon scrubber scrapes a stainless steel screen to clean and break down grit and plant material. Prevents debris build-up and clogging (PESB Series only)

Five year trade warranty

Best-in-class professional series plastic irrigation valves

The PEB Series is our most durable plastic irrigation valve. This industrial-strength glass-filled nylon globe valve is ideal for commercial irrigation applications. The PESB series incorporates innovative scrubber technology for reliable performance in dirty water irrigation applications.

Specs:

Pressure:

20 to 200 psi (1.4 to 13.8 bar)​

Flow without PRS-D option:​

0.25 to 300 gpm (0.06 to 68.1 m3/h, 0.02 to 18.90 l/s)​

Flow with PRS-D option:​

5 to 300 gpm (1.14 to 68.1 m3/h, 0.32 to 18.90 l/s)​

Temperature:​

Up to 150° F (66°C)​

Power:​

24VAC 50/60 Hz (cycles/sec) solenoid power requirement​

Inrush Current:​

0.41A (9.9VA) at 50/60 Hz​

Holding Current​:

0.14A (3.43VA) at 50/60 Hz​

Options:

Accommodates optional, field-installed PRS-D pressure regulating module to ensure optimum sprinkler performance regulates up to 100 psi (6.9 bar)

Accepts latching solenoid for use with Rain Bird battery-operated controllers up to 150 psi (10.35 bar)

Compatible with ESP-LXD decoders

Optional purple flow control handle for non-potable water applications PEB-NP-HAN1 (1"), PEB-NP-HAN2 (1 1/2" and 2")

Dimensions:

100-PEB:

6 1/2" x 4" x 4" - (16.5 cm) x (10.2 cm) x (10.2 cm) H x L x W​

150-PEB:​

8" x 6" x 6" - (20.3 cm) x (15.2 cm) x (15.2 cm) H x L x W​

200-PEB:​

8" x 6" x 6" - (20.3 cm) x (15.2 cm) x (15.2 cm) H x L x W​

300-PESB:​

13 1/4" x 8" x 7" - (34.61 cm) x (20.32 cm) x (17.78 cm) H x L x W​

Model Comparison:

100-PEB & 100-PESB:

1" NPT​

150-PEB & 150-PESB:​

1 1/2" NPT​

A chlorine-resistant diaphragm delivers increased protection against harsh chemicals.

Stand Up to the Storm

The PEB Series is our most durable plastic irrigation valve. This industrial-strength glass-filled nylon globe valve is ideal for commercial irrigation applications.

The PESB series incorporates innovative scrubber technology for reliable performance in dirty water irrigation applications.

20 to 200 psi (1.4 to 13.8 bar)

Flow without PRS-D option:

0.25 to 300 gpm (0.06 to 68.1 m3/h, 0.02 to 18.90 l/s)

Flow with PRS-D option:

5 to 300 gpm (1.14 to 68.1 m3/h, 0.32 to 18.90 l/s)

Temperature:

Up to 150° F (66°C)

Power:

24VAC 50/60 Hz (cycles/sec) solenoid power requirement

Inrush Current:

0.41A (9.9VA) at 50/60 Hz

Holding Current:

0.14A (3.43VA) at 50/60 Hz

6 1/2" x 4" x 4" - (16.5 cm) x (10.2 cm) x (10.2 cm) H x L x W

150-PEB:

8" x 6" x 6" - (20.3 cm) x (15.2 cm) x (15.2 cm) H x L x W

200-PEB:

8" x 6" x 6" - (20.3 cm) x (15.2 cm) x (15.2 cm) H x L x W

300-PESB:

13 1/4" x 8" x 7" - (34.61 cm) x (20.32 cm) x (17.78 cm) H x L x W

1" NPT

150-PEB & 150-PESB:

1 1/2" NPT

200-PEB & 200-PESB:

300-PESB:

3" NPT

Convenient water access in potable and non-potable systems

Industrial-strength brass quick-coupling valves for convenient water access in potable and non-potable systems.

10 to 125 gpm (2.27 to 28.38 m3/h, 37.8 to 473 l/m)

33-DNP, 44-NP, and 5-NP Flow:

10 to 70 gpm (2.27 to 15.89 m3/h, 37.8 to 265 l/m)

5-RC-BSP: 1" (26/34) Rubber Cover, 1-Piece Body, BSP threaded